Workflow Outputs

OpenStudio-HPXML generates a number of workflow outputs:

File	Notes
in.xml	See HPXML Defaults. HPXML file populated with defaulted values (e.g., autosized HVAC capacities).
in.idf	EnergyPlus input file.
in.osm	OpenStudio model file. Only generated if the debug argument is used.
results_annual.csv (or .json or .msgpack)	See Annual Outputs. Simulation annual outputs in CSV or JSON format.
results_timeseries.csv (or .json or .msgpack)	See Timeseries Outputs. Simulation timeseries outputs in CSV or JSON format. Only generated if requested.
results_hpxml.csv (or .json or .msgpack)	See HPXML Outputs. HPXML outputs in CSV or JSON format (e.g., enclosure summary, autosized HVAC capacities, design loads, etc.).
results_bills.csv (or .json or .msgpack)	See Utility Bill Outputs. Utility bill outputs in CSV or JSON format.
run.log	Errors/warnings generated by the OpenStudio-HPXML workflow.
eplusout.*	EnergyPlus output files (e.g., msgpack output, error log). Defaults to a subset of possible files; use debug to produce ALL files.

HPXML Defaults

OpenStudio-HPXML will always generate an HPXML file called in.xml, located in the run directory. This file reflects the HPXML input file provided by the user but includes any default values that OpenStudio-HPXML has used. These default values will all be tagged with the dataSource='software' attribute.

For example, suppose a central air conditioner is described in the HPXML input file like so:

<HVACPlant>
  <CoolingSystem>
    <SystemIdentifier id='CoolingSystem1'/>
    <DistributionSystem idref='HVACDistribution1'/>
    <CoolingSystemType>central air conditioner</CoolingSystemType>
    <CoolingSystemFuel>electricity</CoolingSystemFuel>
    <FractionCoolLoadServed>1.0</FractionCoolLoadServed>
    <AnnualCoolingEfficiency>
      <Units>SEER</Units>
      <Value>13.0</Value>
    </AnnualCoolingEfficiency>
  </CoolingSystem>
</HVACPlant>

The in.xml output file will include autosized HVAC capacities as well as some other details:

<HVACPlant>
  <CoolingSystem>
    <SystemIdentifier id='CoolingSystem1'/>
    <DistributionSystem idref='HVACDistribution1'/>
    <CoolingSystemType>central air conditioner</CoolingSystemType>
    <CoolingSystemFuel>electricity</CoolingSystemFuel>
    <CoolingCapacity dataSource='software'>18773.0</CoolingCapacity>
    <CompressorType dataSource='software'>single stage</CompressorType>
    <FractionCoolLoadServed>1.0</FractionCoolLoadServed>
    <AnnualCoolingEfficiency>
      <Units>SEER</Units>
      <Value>13.0</Value>
    </AnnualCoolingEfficiency>
    <SensibleHeatFraction dataSource='software'>0.73</SensibleHeatFraction>
    <extension>
      <AirflowDefectRatio dataSource='software'>0.0</AirflowDefectRatio>
      <ChargeDefectRatio dataSource='software'>0.0</ChargeDefectRatio>
      <FanPowerWattsPerCFM dataSource='software'>0.375</FanPowerWattsPerCFM>
      <CoolingAirflowCFM dataSource='software'>781.0</CoolingAirflowCFM>
    </extension>
  </CoolingSystem>
</HVACPlant>

Annual Outputs

OpenStudio-HPXML will always generate an annual output file called results_annual.csv (or results_annual.json or results_annual.msgpack), located in the run directory. The file includes the following sections of output:

Annual Energy Consumption by Fuel Use

Fuel uses are listed below.

Type	Notes
Fuel Use: Electricity: Total (MBtu)
Fuel Use: Electricity: Net (MBtu)	Subtracts any power produced by PV (including any battery storage) or generators.
Fuel Use: Natural Gas: Total (MBtu)
Fuel Use: Fuel Oil: Total (MBtu)	Includes “fuel oil”, “fuel oil 1”, “fuel oil 2”, “fuel oil 4”, “fuel oil 5/6”, “kerosene”, and “diesel”
Fuel Use: Propane: Total (MBtu)
Fuel Use: Wood: Total (MBtu)
Fuel Use: Wood Pellets: Total (MBtu)
Fuel Use: Coal: Total (MBtu)	Includes “coal”, “anthracite coal”, “bituminous coal”, and “coke”.

Annual Energy Consumption By End Use

End uses are listed below.

Note that all end uses are mutually exclusive – the “Electricity: Heating” end use, for example, excludes energy reported in the “Electricity: Heating Fans/Pumps” end use. So the sum of all end uses for a given fuel (e.g., sum of all “End Use: Natural Gas: *”) equal the above reported fuel use (e.g., “Fuel Use: Natural Gas: Total”).

Type	Notes
End Use: Electricity: Heating (MBtu)	Excludes heat pump backup and fans/pumps
End Use: Electricity: Heating Heat Pump Backup (MBtu)
End Use: Electricity: Heating Fans/Pumps (MBtu)
End Use: Electricity: Cooling (MBtu)	Excludes fans/pumps
End Use: Electricity: Cooling Fans/Pumps (MBtu)
End Use: Electricity: Hot Water (MBtu)	Excludes recirc pump and solar thermal pump
End Use: Electricity: Hot Water Recirc Pump (MBtu)
End Use: Electricity: Hot Water Solar Thermal Pump (MBtu)	Non-zero only when using detailed (not simple) solar thermal inputs
End Use: Electricity: Lighting Interior (MBtu)
End Use: Electricity: Lighting Garage (MBtu)
End Use: Electricity: Lighting Exterior (MBtu)
End Use: Electricity: Mech Vent (MBtu)	Excludes preheating/precooling
End Use: Electricity: Mech Vent Preheating (MBtu)
End Use: Electricity: Mech Vent Precooling (MBtu)
End Use: Electricity: Whole House Fan (MBtu)
End Use: Electricity: Refrigerator (MBtu)
End Use: Electricity: Freezer (MBtu)
End Use: Electricity: Dehumidifier (MBtu)
End Use: Electricity: Dishwasher (MBtu)
End Use: Electricity: Clothes Washer (MBtu)
End Use: Electricity: Clothes Dryer (MBtu)
End Use: Electricity: Range/Oven (MBtu)
End Use: Electricity: Ceiling Fan (MBtu)
End Use: Electricity: Television (MBtu)
End Use: Electricity: Plug Loads (MBtu)	Excludes independently reported plug loads (e.g., well pump)
End Use: Electricity: Electric Vehicle Charging (MBtu)
End Use: Electricity: Well Pump (MBtu)
End Use: Electricity: Pool Heater (MBtu)
End Use: Electricity: Pool Pump (MBtu)
End Use: Electricity: Hot Tub Heater (MBtu)
End Use: Electricity: Hot Tub Pump (MBtu)
End Use: Electricity: PV (MBtu)	Negative value for any power produced (including any battery storage)
End Use: Electricity: Generator (MBtu)	Negative value for any power produced
End Use: Natural Gas: Heating (MBtu)	Excludes heat pump backup
End Use: Natural Gas: Heating Heat Pump Backup (MBtu)
End Use: Natural Gas: Hot Water (MBtu)
End Use: Natural Gas: Clothes Dryer (MBtu)
End Use: Natural Gas: Range/Oven (MBtu)
End Use: Natural Gas: Mech Vent Preheating (MBtu)
End Use: Natural Gas: Mech Vent Precooling (MBtu)
End Use: Natural Gas: Pool Heater (MBtu)
End Use: Natural Gas: Hot Tub Heater (MBtu)
End Use: Natural Gas: Grill (MBtu)
End Use: Natural Gas: Lighting (MBtu)
End Use: Natural Gas: Fireplace (MBtu)
End Use: Natural Gas: Generator (MBtu)	Positive value for any fuel consumed
End Use: Fuel Oil: Heating (MBtu)	Excludes heat pump backup
End Use: Fuel Oil: Heating Heat Pump Backup (MBtu)
End Use: Fuel Oil: Hot Water (MBtu)
End Use: Fuel Oil: Clothes Dryer (MBtu)
End Use: Fuel Oil: Range/Oven (MBtu)
End Use: Fuel Oil: Mech Vent Preheating (MBtu)
End Use: Fuel Oil: Mech Vent Precooling (MBtu)
End Use: Fuel Oil: Grill (MBtu)
End Use: Fuel Oil: Lighting (MBtu)
End Use: Fuel Oil: Fireplace (MBtu)
End Use: Propane: Heating (MBtu)	Excludes heat pump backup
End Use: Propane: Heating Heat Pump Backup (MBtu)
End Use: Propane: Hot Water (MBtu)
End Use: Propane: Clothes Dryer (MBtu)
End Use: Propane: Range/Oven (MBtu)
End Use: Propane: Mech Vent Preheating (MBtu)
End Use: Propane: Mech Vent Precooling (MBtu)
End Use: Propane: Grill (MBtu)
End Use: Propane: Lighting (MBtu)
End Use: Propane: Fireplace (MBtu)
End Use: Propane: Generator (MBtu)	Positive value for any fuel consumed
End Use: Wood Cord: Heating (MBtu)	Excludes heat pump backup
End Use: Wood Cord: Heating Heat Pump Backup (MBtu)
End Use: Wood Cord: Hot Water (MBtu)
End Use: Wood Cord: Clothes Dryer (MBtu)
End Use: Wood Cord: Range/Oven (MBtu)
End Use: Wood Cord: Mech Vent Preheating (MBtu)
End Use: Wood Cord: Mech Vent Precooling (MBtu)
End Use: Wood Cord: Grill (MBtu)
End Use: Wood Cord: Lighting (MBtu)
End Use: Wood Cord: Fireplace (MBtu)
End Use: Wood Pellets: Heating (MBtu)	Excludes heat pump backup
End Use: Wood Pellets: Heating Heat Pump Backup (MBtu)
End Use: Wood Pellets: Hot Water (MBtu)
End Use: Wood Pellets: Clothes Dryer (MBtu)
End Use: Wood Pellets: Range/Oven (MBtu)
End Use: Wood Pellets: Mech Vent Preheating (MBtu)
End Use: Wood Pellets: Mech Vent Precooling (MBtu)
End Use: Wood Pellets: Grill (MBtu)
End Use: Wood Pellets: Lighting (MBtu)
End Use: Wood Pellets: Fireplace (MBtu)
End Use: Coal: Heating (MBtu)	Excludes heat pump backup
End Use: Coal: Heating Heat Pump Backup (MBtu)
End Use: Coal: Hot Water (MBtu)
End Use: Coal: Clothes Dryer (MBtu)
End Use: Coal: Range/Oven (MBtu)
End Use: Coal: Mech Vent Preheating (MBtu)
End Use: Coal: Mech Vent Precooling (MBtu)
End Use: Coal: Grill (MBtu)
End Use: Coal: Lighting (MBtu)
End Use: Coal: Fireplace (MBtu)

Annual Emissions

Results for each emissions scenario defined in the HPXML file is listed as shown below.

Type	Notes
Emissions: <EmissionsType>: <Scenario1Name>: Total (lb)	Scenario 1 total emissions
Emissions: <EmissionsType>: <Scenario1Name>: Electricity (lb)	Scenario 1 emissions for Electricity only
Emissions: <EmissionsType>: <Scenario1Name>: Natural Gas (lb)	Scenario 1 emissions for Natural Gas only
Emissions: <EmissionsType>: <Scenario1Name>: Fuel Oil (lb)	Scenario 1 emissions for Fuel Oil only
Emissions: <EmissionsType>: <Scenario1Name>: Propane (lb)	Scenario 1 emissions for Propane only
Emissions: <EmissionsType>: <Scenario1Name>: Wood Cord (lb)	Scenario 1 emissions for Wood Cord only
Emissions: <EmissionsType>: <Scenario1Name>: Wood Pellets (lb)	Scenario 1 emissions for Wood Pellets only
Emissions: <EmissionsType>: <Scenario1Name>: Coal (lb)	Scenario 1 emissions for Coal only
Emissions: <EmissionsType>: <Scenario2Name>: Total (lb)	Scenario 2 total emissions
Emissions: <EmissionsType>: <Scenario2Name>: Electricity (lb)	Scenario 2 emissions for Electricity only
Emissions: <EmissionsType>: <Scenario2Name>: Natural Gas (lb)	Scenario 2 emissions for Natural Gas only
Emissions: <EmissionsType>: <Scenario2Name>: Fuel Oil (lb)	Scenario 2 emissions for Fuel Oil only
Emissions: <EmissionsType>: <Scenario2Name>: Propane (lb)	Scenario 2 emissions for Propane only
Emissions: <EmissionsType>: <Scenario2Name>: Wood Cord (lb)	Scenario 2 emissions for Wood Cord only
Emissions: <EmissionsType>: <Scenario2Name>: Wood Pellets (lb)	Scenario 2 emissions for Wood Pellets only
Emissions: <EmissionsType>: <Scenario2Name>: Coal (lb)	Scenario 2 emissions for Coal only
…

Annual Building Loads

Annual building loads are listed below.

Type	Notes
Load: Heating: Delivered (MBtu)	Includes HVAC distribution losses.
Load: Cooling: Delivered (MBtu)	Includes HVAC distribution losses.
Load: Hot Water: Delivered (MBtu)	Includes contributions by desuperheaters or solar thermal systems.
Load: Hot Water: Tank Losses (MBtu)
Load: Hot Water: Desuperheater (MBtu)	Load served by the desuperheater.
Load: Hot Water: Solar Thermal (MBtu)	Load served by the solar thermal system.

Note that the “Delivered” loads represent the energy delivered by the HVAC/DHW system; if a system is significantly undersized, there will be unmet load not reflected by these values.

Annual Unmet Hours

Annual unmet hours are listed below.

Type	Notes
Unmet Hours: Heating (hr)	Number of hours where the heating setpoint is not maintained.
Unmet Hours: Cooling (hr)	Number of hours where the cooling setpoint is not maintained.

These numbers reflect the number of hours of the year when the conditioned space temperature is more than 0.2 deg-C (0.36 deg-F) from the setpoint during heating/cooling.

Peak Building Electricity

Peak building electricity outputs are listed below.

Type	Notes
Peak Electricity: Winter Total (W)	Winter season defined by operation of the heating system.
Peak Electricity: Summer Total (W)	Summer season defined by operation of the cooling system.

Peak Building Loads

Peak building loads are listed below.

Type	Notes
Peak Load: Heating: Delivered (kBtu)	Includes HVAC distribution losses.
Peak Load: Cooling: Delivered (kBtu)	Includes HVAC distribution losses.

Note that the “Delivered” peak loads represent the energy delivered by the HVAC system; if a system is significantly undersized, there will be unmet peak load not reflected by these values.

Annual Component Building Loads

Note: This section is only available if the --add-component-loads argument is used. The argument is not used by default for faster performance.

Component loads represent the estimated contribution of different building components to the annual heating/cooling building loads. The sum of component loads for heating (or cooling) will roughly equal the annual heating (or cooling) building load reported above.

Component loads disaggregated by Heating/Cooling are listed below.

Type	Notes
Component Load: *: Roofs (MBtu)	Heat gain/loss through HPXML Roof elements adjacent to conditioned space
Component Load: *: Ceilings (MBtu)	Heat gain/loss through HPXML FrameFloor elements (inferred to be ceilings) adjacent to conditioned space
Component Load: *: Walls (MBtu)	Heat gain/loss through HPXML Wall elements adjacent to conditioned space
Component Load: *: Rim Joists (MBtu)	Heat gain/loss through HPXML RimJoist elements adjacent to conditioned space
Component Load: *: Foundation Walls (MBtu)	Heat gain/loss through HPXML FoundationWall elements adjacent to conditioned space
Component Load: *: Doors (MBtu)	Heat gain/loss through HPXML Door elements adjacent to conditioned space
Component Load: *: Windows (MBtu)	Heat gain/loss through HPXML Window elements adjacent to conditioned space, including solar
Component Load: *: Skylights (MBtu)	Heat gain/loss through HPXML Skylight elements adjacent to conditioned space, including solar
Component Load: *: Floors (MBtu)	Heat gain/loss through HPXML FrameFloor elements (inferred to be floors) adjacent to conditioned space
Component Load: *: Slabs (MBtu)	Heat gain/loss through HPXML Slab elements adjacent to conditioned space
Component Load: *: Internal Mass (MBtu)	Heat gain/loss from internal mass (e.g., furniture, interior walls/floors) in conditioned space
Component Load: *: Infiltration (MBtu)	Heat gain/loss from airflow induced by stack and wind effects
Component Load: *: Natural Ventilation (MBtu)	Heat gain/loss from airflow through operable windows
Component Load: *: Mechanical Ventilation (MBtu)	Heat gain/loss from airflow/fan energy from mechanical ventilation systems (including clothes dryer exhaust)
Component Load: *: Whole House Fan (MBtu)	Heat gain/loss from airflow due to a whole house fan
Component Load: *: Ducts (MBtu)	Heat gain/loss from conduction and leakage losses through supply/return ducts outside conditioned space
Component Load: *: Internal Gains (MBtu)	Heat gain/loss from appliances, lighting, plug loads, water heater tank losses, etc. in the conditioned space

Annual Hot Water Uses

Annual hot water uses are listed below.

Type	Notes
Hot Water: Clothes Washer (gal)
Hot Water: Dishwasher (gal)
Hot Water: Fixtures (gal)	Showers and faucets.
Hot Water: Distribution Waste (gal)

Timeseries Outputs

OpenStudio-HPXML can optionally generate a timeseries output file. The timeseries output file is called results_timeseries.csv (or results_timeseries.json or results_timeseries.msgpack) and located in the run directory.

Depending on the outputs requested, the file may include:

Type	Notes
Total Consumptions	Energy use for building total.
Fuel Consumptions	Energy use for each fuel type (in kBtu for fossil fuels and kWh for electricity).
End Use Consumptions	Energy use for each end use type (in kBtu for fossil fuels and kWh for electricity).
Emissions	Emissions (e.g., CO2) for each scenario defined in the HPXML file.
Hot Water Uses	Water use for each end use type (in gallons).
Total Loads	Heating, cooling, and hot water loads (in kBtu) for the building.
Component Loads	Heating and cooling loads (in kBtu) disaggregated by component (e.g., Walls, Windows, Infiltration, Ducts, etc.).
Zone Temperatures	Average temperatures (in deg-F) for each space modeled (e.g., living space, attic, garage, basement, crawlspace, etc.).
Airflows	Airflow rates (in cfm) for infiltration, mechanical ventilation (including clothes dryer exhaust), natural ventilation, whole house fans.
Weather	Weather file data including outdoor temperatures, relative humidity, wind speed, and solar.
EnergyPlus Output Variables	These are optional and can be requested with the ReportSimulationOutput user_output_variables argument.

Timeseries outputs can be one of the following frequencies: hourly, daily, monthly, or timestep (i.e., equal to the simulation timestep, which defaults to an hour but can be sub-hourly).

Timestamps in the output use the end-of-hour (or end-of-day for daily frequency, etc.) convention. Additional timestamp columns can be optionally requested that reflect daylight saving time (DST) and/or coordinated universal time (UTC). Most outputs will be summed over the hour (e.g., energy) but some will be averaged over the hour (e.g., temperatures, airflows).

HPXML Outputs

OpenStudio-HPXML will always generate an output file called results_hpxml.csv (or results_hpxml.json or results_hpxml.msgpack), located in the run directory. Unlike the other output files that are based on EnergyPlus simulation results, this file contains outputs summarizing the HPXML file (including defaults like auto-sized HVAC systems). The file includes the following sections of output:

Enclosure

Enclosure outputs are listed below.

Type	Notes
Enclosure: Wall Area Thermal Boundary (ft^2)	Total thermal boundary wall area
Enclosure: Wall Area Exterior (ft^2)	Total exterior wall area
Enclosure: Foundation Wall Area Exterior (ft^2)	Total exterior foundation wall area
Enclosure: Floor Area Conditioned (ft^2)	Total conditioned floor area
Enclosure: Floor Area Lighting (ft^2)	Total lighting floor area
Enclosure: Floor Area Foundation (ft^2)	Total foundation floor area
Enclosure: Ceiling Area Thermal Boundary (ft^2)	Total thermal boundary ceiling area
Enclosure: Roof Area (ft^2)	Total roof area
Enclosure: Window Area (ft^2)	Total window area
Enclosure: Door Area (ft^2)	Total door area
Enclosure: Duct Area Unconditioned (ft^2)	Total unconditioned duct area
Enclosure: Rim Joist Area (ft^2)	Total rim joist area
Enclosure: Slab Exposed Perimeter Thermal Boundary (ft)	Total thermal boundary slab exposed perimeter

Systems

System outputs are listed below. Autosized HVAC systems are based on ACCA Manual S calculations.

Type	Notes
Systems: Cooling Capacity (Btu/h)	Total HVAC cooling capacity
Systems: Heating Capacity (Btu/h)	Total HVAC heating capacity
Systems: Heat Pump Backup Capacity (Btu/h)	Total HVAC heat pump backup capacity
Systems: Water Heater Tank Volume (gal)	Total water heater tank volume
Systems: Mechanical Ventilation Flow Rate (cfm)	Total mechanical ventilation flow rate

If the HPXML file has Systems/HVAC/HVACPlant/PrimarySystems populated, then additional system outputs will be provided:

Type	Notes
Primary Systems: Cooling Capacity (Btu/h)	Cooling capacity of primary system
Primary Systems: Heating Capacity (Btu/h)	Heating capacity of primary system
Primary Systems: Heat Pump Backup Capacity (Btu/h)	Heat pump backup capacity of primary system
Secondary Systems: Cooling Capacity (Btu/h)	Cooling capacity of secondary system; only provided if a non-primary system is present
Secondary Systems: Heating Capacity (Btu/h)	Heating capacity of secondary system; only provided if a non-primary system is present
Secondary Systems: Heat Pump Backup Capacity (Btu/h)	Heat pump backup capacity of secondary system; only provided if a non-primary system is present

Design Loads

Design load outputs are listed below. Design loads are based on block load ACCA Manual J calculations.

Type	Notes
Design Loads Heating: Total (Btu/h)	Total heating design load
Design Loads Heating: Ducts (Btu/h)	Heating design load for ducts
Design Loads Heating: Windows (Btu/h)	Heating design load for windows
Design Loads Heating: Skylights (Btu/h)	Heating design load for skylights
Design Loads Heating: Doors (Btu/h)	Heating design load for doors
Design Loads Heating: Walls (Btu/h)	Heating design load for walls
Design Loads Heating: Roofs (Btu/h)	Heating design load for roofs
Design Loads Heating: Floors (Btu/h)	Heating design load for floors
Design Loads Heating: Slabs (Btu/h)	Heating design load for slabs
Design Loads Heating: Ceilings (Btu/h)	Heating design load for ceilings
Design Loads Heating: Infiltration/Ventilation (Btu/h)	Heating design load for infiltration/ventilation
Design Loads Cooling Sensible: Total (Btu/h)	Total sensible cooling design load
Design Loads Cooling Sensible: Ducts (Btu/h)	Sensible cooling design load for ducts
Design Loads Cooling Sensible: Windows (Btu/h)	Sensible cooling design load for windows
Design Loads Cooling Sensible: Skylights (Btu/h)	Sensible cooling design load for skylights
Design Loads Cooling Sensible: Doors (Btu/h)	Sensible cooling design load for doors
Design Loads Cooling Sensible: Walls (Btu/h)	Sensible cooling design load for walls
Design Loads Cooling Sensible: Roofs (Btu/h)	Sensible cooling design load for roofs
Design Loads Cooling Sensible: Floors (Btu/h)	Sensible cooling design load for floors
Design Loads Cooling Sensible: Slabs (Btu/h)	Sensible cooling design load for slabs
Design Loads Cooling Sensible: Ceilings (Btu/h)	Sensible cooling design load for ceilings
Design Loads Cooling Sensible: Infiltration/Ventilation (Btu/h)	Sensible cooling design load for infiltration/ventilation
Design Loads Cooling Sensible: Internal Gains (Btu/h)	Sensible cooling design load for internal gains
Design Loads Cooling Latent: Total (Btu/h)	Total latent cooling design load
Design Loads Cooling Latent: Ducts (Btu/h)	Latent cooling design load for ducts
Design Loads Cooling Latent: Infiltration/Ventilation (Btu/h)	Latent cooling design load for infiltration/ventilation
Design Loads Cooling Latent: Internal Gains (Btu/h)	Latent cooling design load for internal gains

Utility Bill Outputs

OpenStudio-HPXML can optionally generate a utility bills output file. The utility bills output file is called results_bills.csv (or results_bills.json or results_bills.msgpack) and located in the run directory. Monthly fixed charges and marginal rates, as well as PV compensation types/rates/fees, are defined to determine how utility bills are calculated.

The file includes:

Type	Notes
Total ($)	Annual total charges.
Electricity: Fixed ($)	Annual fixed charges for electricity.
Electricity: Marginal ($)	Annual energy charges for electricity.
Electricity: PV Credit ($)	Annual production credit (negative value) for PV.
Electricity: Total ($)	Annual total charges for electricity.
Natural Gas: Fixed ($)	Annual fixed charges for natural gas.
Natural Gas: Marginal ($)	Annual energy charges for natural gas.
Natural Gas: Total ($)	Annual total charges for natural gas.
Fuel Oil: Total ($)	Annual total charges for fuel oil.
Propane: Total ($)	Annual total charges for propane.
Wood Cord: Total ($)	Annual total charges for wood cord.
Wood Pellets: Total ($)	Annual total charges for wood pellets.
Coal: Total ($)	Annual total charges for coal.